China Custom Power Transmission Component Timing Belt Pulley with Great quality

Product Description

CHINAMFG Machinery offers a wide range of high quality Timing Belt Pulleys and Toothed Bars/ Timing Bars. Standard and non-standard pulleys according to drawings are available.

 
Types of material:
  1. AlCuMgPb 6061 6082 Aluminum Timing Pulley
  2. C45E 1045 S45C Carbon Steel Timing Pulley
  3. GG25 HT250 Cast Iron Timing Pulley
  4. SUS303 SUS304 AISI431 Stainless Steel Timing Pulley
  5. Other material on demand,  such as cooper,  bronze and plastic
 
Types of surface treatment
 1.  Anodized surface –Aluminum Pulleys
 2.  Hard anodized surface — Aluminum Pulleys
 3.  Black Oxidized surface — Steel Pulleys
 4. Zinc plated surface — Steel Pulleys
 5. Chromate surface — Steel Pulleys; Cast Iron Pulleys
 6. Nickel plated surface –Steel Pulleys; Cast Iron Pulleys
 
Types of teeth profile

Teeth Profile Pitch
HTD 3M,5M,8M,14M,20M
AT AT5,AT10,AT20
T T2.5,T5,T10
MXL 0.08″(2.032MM)
XL 1/5″(5.08MM)
L 3/8″(9.525MM)
H 1/2″(12.7MM)
XH 7/8″(22.225MM)
XXH 1 1/4″(31.75MM)
STS STPD S2M,S3M,S4.5M,S5M,S8M,S14M
RPP RPP5M,RPP8M,RPP14M,RPP20M
PGGT PGGT  2GT, 3GT and 5GT
PCGT GT8M,GT14M

 
Types of pitches and sizes

Imperial Inch Timing Belt Pulley,
1.     Pilot Bore MXL571 for 6.35mm timing belt; teeth number from 16 to 72;
2.  Pilot Bore XL037 for 9.53mm timing belt; teeth number from 10 to 72;
3.  Pilot Bore, Taper Bore L050 for 12.7mm timing belt; teeth number from 10 to 120;
4.  Pilot Bore, Taper Bore L075 for 19.05mm timing belt; teeth number from 10 to 120;
5.  Pilot Bore, Taper Bore L100 for 25.4mm timing belt; teeth number from 10 to 120;
6.  Pilot Bore, Taper Bore H075 for 19.05mm timing belt; teeth number from 14 to 50;
7.  Pilot Bore, Taper Bore H100 for 25.4mm timing belt; teeth number from 14 to 156;
8.  Pilot Bore, Taper Bore H150 for 38.1mm timing belt; teeth number from 14 to 156;
9.  Pilot Bore, Taper Bore H200 for 50.8mm timing belt; teeth number from 14 to 156;
10.  Pilot Bore, Taper Bore H300 for 76.2mm timing belt; teeth number from 14 to 156;
11.  Taper Bore XH200 for 50.8mm timing belt; teeth number from 18 to 120;
12.  Taper Bore XH300 for 76.2mm timing belt; teeth number from 18 to 120;
13.  Taper Bore XH400 for 101.6mm timing belt; teeth number from 18 to 120;

Metric Timing Belt Pulley T and AT
1.  Pilot Bore T2.5-16 for 6mm timing belt; teeth number from 12 to 60; 
2.   Pilot Bore T5-21 for 10mm timing belt; teeth number from 10 to 60; 
3.   Pilot Bore T5-27 for 16mm timing belt; teeth number from 10 to 60; 
4.   Pilot Bore T5-36 for 25mm timing belt; teeth number from 10 to 60; 
5.   Pilot Bore T10-31 for 16mm timing belt; teeth number from 12 to 60; 
6.   Pilot Bore T10-40 for 25mm timing belt; teeth number from 12 to 60; 
7.   Pilot Bore T10-47 for 32mm timing belt; teeth number from 18 to 60; 
8.   Pilot Bore T10-66 for 50mm timing belt; teeth number from 18 to 60;
9.  Pilot Bore AT5-21 for 10mm timing belt; teeth number from 12 to 60;
10. Pilot Bore AT5-27 for 16mm timing belt; teeth number from 12 to 60;
11. Pilot Bore AT5-36 for 25mm timing belt; teeth number from 12 to 60; 
12. Pilot Bore AT10-31 for 16mm timing belt; teeth number from 15 to 60; 
13. Pilot Bore AT10-40 for 25mm timing belt; teeth number from 15 to 60; 
14. Pilot Bore AT10-47 for 32mm timing belt; teeth number from 18 to 60; 
15. Pilot Bore AT10-66 for 50mm timing belt; teeth number from 18 to 60;
  
Metric Timing Belt Pulley HTD3M, 5M, 8M, 14M 
1.  HTD3M-06; 3M-09; 3M-15; teeth number from 10 to 72; 
2.  HTD5M-09; 5M-15; 5M-25; teeth number from 12 to 72; 
3.  HTD8M-20; 8M-30; 8M-50; 8M-85 teeth number from 22 to 192; 
4.  HTD14M-40; 14M-55; 14M-85; 14M-115; 14M-170; teeth number from 28-216; 
5.  Taper Bore HTD5M-15; 8M-20; 8M-30; 8M-50; 8M-85; 14M-40; 14M-55; 14M-85;
         14M-115; 14M-170

Metric Timing Belt Pulleys for Poly Chain GT2 Belts 
1.      PCGT8M-12; PCGT8M-21; PCGT8M-36; PCGT8M-62; 
2.      PCGT14M-20; PCGT14M-37; PCGT14M-68; PCGT14M-90; PCGT14M-125;

Power Grip CHINAMFG Tooth/ PGGT 2GT, 3GT and 5GT 
1. 2GT-06, 2GT-09 for timing belt width 6mm and 9mm 
2. 3GT-09, 3GT-15 for timing belt width 9mm and 15mm 
3. 5GT-15, 5GT-25 for timing belt width 15mm and 25mm

OMEGA RPP HTD Timing Pulleys 
1.   RPP3M-06; 3M-09; 3M-15; teeth number from 10 to 72; 
2.   RPP5M-09; 5M-15; 5M-25; teeth number from 12 to 72; 
3.   RPP8M-20; 8M-30; 8M-50; 8M-85 teeth number from 22 to 192; 
4.   RPP14M-40; 14M-55; 14M-85; 14M-115; 14M-170; teeth number from 28-216; 
5.  Taper Bore RPP5M-15; 8M-20; 8M-30; 8M-50; 8M-85; 14M-40; 14M-55; 14M-85;
     14M-115; 14M-170

Certification: ISO
Pulley Sizes: Timing
Manufacturing Process: Sawing
Material: Steel, Aluminum
Surface Treatment: Zinc Coating, Nickel Plating, Black Oxide
Steel: Black Oxidized
Samples:
US$ 3/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

htd pulley

How do HTD pulleys contribute to the functioning of medical and laboratory equipment?

HTD pulleys play a significant role in the functioning of medical and laboratory equipment, enabling precise and reliable movement of components and facilitating essential processes. Here’s a detailed explanation of how HTD pulleys contribute to the functioning of medical and laboratory equipment:

1. Sample Handling and Transport:

In medical and laboratory equipment, such as centrifuges and automated sample handling systems, HTD pulleys are used to drive the movement of sample holders, racks, or trays. The pulleys, in conjunction with belts or timing systems, facilitate the precise and controlled transport of samples within the equipment. This allows for accurate positioning, sorting, and delivery of samples, ensuring efficient workflows and reliable analysis or testing.

2. Fluid Handling and Pumping:

HTD pulleys are utilized in medical and laboratory equipment that involves fluid handling and pumping, such as liquid chromatography systems or diagnostic instruments. The pulleys, combined with belts or timing systems, drive the rotation of pumps, valves, or syringe drives, enabling the controlled flow of fluids. This precise fluid handling is crucial for accurate dosing, mixing, or analysis, ensuring reliable results and maintaining the integrity of experiments or medical procedures.

3. Motion Control in Robotic Systems:

In robotic systems used in medical and laboratory applications, HTD pulleys are employed to control the movement of robotic arms, grippers, or other robotic components. The pulleys, along with belts or timing systems, drive the motion of these components, enabling precise positioning, sample handling, or instrument manipulation. This contributes to the automation and efficiency of various processes, such as sample preparation, liquid handling, or high-throughput screening.

4. Imaging and Scanning Mechanisms:

HTD pulleys are used in medical and laboratory equipment that involves imaging or scanning mechanisms, such as medical imaging devices or microscopy systems. The pulleys, in combination with belts or timing systems, drive the movement of scanning stages or sample holders, allowing for precise positioning and scanning of samples. This ensures accurate and high-resolution imaging or scanning, enabling detailed analysis, diagnosis, or research observations.

5. Instrument Calibration and Adjustment:

In medical and laboratory equipment that requires calibration or adjustment, HTD pulleys are utilized to drive the movement of calibration mechanisms or adjustment components. The pulleys, along with belts or timing systems, enable precise control over the positioning and fine-tuning of instruments or sensors. This ensures optimal accuracy, calibration, or alignment of the equipment, enhancing the reliability and quality of experimental or diagnostic results.

6. Variable Speed Control:

HTD pulleys are frequently employed to achieve variable speed control in medical and laboratory equipment. By adjusting the diameter or configuration of the pulleys and selecting the appropriate belts, the rotational speed of various components, such as sample transport systems or instrument drives, can be easily controlled. This flexibility in speed control allows for customization to specific experimental requirements, ensuring optimal performance and reproducibility.

7. Customization and System Integration:

HTD pulleys offer flexibility for customization and system integration in medical and laboratory equipment. They are available in various sizes, tooth profiles, and materials, allowing for the design and optimization of pulley systems to meet specific requirements. Pulleys can be easily integrated into existing equipment or incorporated into new system designs, providing compatibility and versatility. This facilitates the development of tailored solutions for medical and laboratory applications, optimizing performance and functionality.

In summary, HTD pulleys play a crucial role in the functioning of medical and laboratory equipment. They contribute to sample handling and transport, fluid handling and pumping, motion control in robotic systems, imaging and scanning mechanisms, instrument calibration and adjustment, variable speed control, as well as customization and system integration. By enabling precise motion control, reliable power transmission, and flexibility in system design, HTD pulleys enhance the efficiency, accuracy, and automation of processes in medical and laboratory settings.

htd pulley

What maintenance procedures are necessary to ensure the reliability of HTD pulleys?

To ensure the reliability and optimal performance of HTD pulleys, several maintenance procedures should be followed. These procedures help identify and address potential issues, prevent premature wear or failure, and extend the lifespan of the pulleys. Here’s a detailed explanation of the necessary maintenance procedures for HTD pulleys:

1. Regular Inspection:

Regular inspections are essential to identify any signs of wear, damage, or misalignment in HTD pulleys. Inspect the pulleys visually, looking for cracks, chips, or deformations. Check the teeth for excessive wear or damage. Ensure that the pulleys are properly aligned and that there are no signs of excessive vibration or noise during operation. Regular inspections allow for early detection of potential problems, enabling timely maintenance or replacement of the pulleys to prevent further damage or failures.

2. Belt Tension Checks:

Proper belt tension is crucial for the reliable operation of HTD pulleys. Insufficient tension can cause belt slippage, while excessive tension can lead to premature wear on the pulleys and belts. Regularly check the belt tension using appropriate tensioning tools or methods recommended by the pulley manufacturer. Adjust the tension as needed to ensure it falls within the specified range. Maintaining the correct belt tension helps optimize power transmission, reduce wear, and prevent belt failure.

3. Lubrication:

Lubrication is important for reducing friction and wear in HTD pulleys. Some pulleys may require periodic lubrication of the bearings or bushings to ensure smooth operation. Consult the manufacturer’s guidelines to determine the appropriate lubrication intervals and the type of lubricant to use. Apply the lubricant as recommended, taking care not to over-lubricate. Proper lubrication helps minimize friction and heat generation, extending the lifespan of the pulleys and ensuring reliable performance.

4. Alignment:

Proper alignment of HTD pulleys is crucial for their reliability. Misalignment can cause premature wear on the belts, pulleys, and bearings, leading to reduced performance and potential failures. Regularly check the alignment of the pulleys using alignment tools or methods recommended by the manufacturer. Adjust the pulley positions as necessary to ensure proper alignment. Proper alignment ensures efficient power transmission, reduces wear, and minimizes the risk of belt slippage or premature failure.

5. Cleaning:

Keeping HTD pulleys clean is important for their reliable operation. Regularly clean the pulleys to remove dust, debris, or other contaminants that can accumulate on the pulley surfaces or teeth. Use a soft brush or cloth to gently clean the pulleys, taking care not to damage the teeth or other delicate parts. Avoid using harsh chemicals that can degrade the pulley material. Clean pulleys contribute to improved belt traction, reduced wear, and enhanced overall reliability.

6. Replacement of Worn or Damaged Components:

If any HTD pulley components, such as the pulleys themselves or the belts, are worn, damaged, or nearing the end of their lifespan, they should be replaced promptly. Worn or damaged pulleys can compromise the performance and reliability of the entire system. Follow the manufacturer’s recommendations for replacement parts and ensure that the new components meet the required specifications. Timely replacement of worn or damaged components helps maintain the reliability and longevity of HTD pulleys.

7. Follow Manufacturer’s Guidelines:

Lastly, it is important to follow the specific maintenance guidelines provided by the HTD pulley manufacturer. Different pulley designs and materials may require specific maintenance procedures or intervals. Consult the manufacturer’s documentation for detailed instructions on maintenance, lubrication, inspection, and any other relevant procedures. Adhering to the manufacturer’s guidelines ensures that the pulleys are maintained correctly and maximizes their reliability and performance.

In summary, to ensure the reliability of HTD pulleys, regular inspections, belt tension checks, lubrication, alignment, cleaning, replacement of worn components, and adherence to the manufacturer’s guidelines are necessary. By following these maintenance procedures, the lifespan of HTD pulleys can be extended, and their reliable operation can be ensured, minimizing downtime and optimizing the performance of the systems in which they are used.

htd pulley

Can you explain the design features and profile of an HTD pulley?

An HTD pulley, which stands for “High Torque Drive” pulley, has specific design features and a unique tooth profile that distinguishes it from other pulley types. Here’s a detailed explanation of the design features and profile of an HTD pulley:

1. Tooth Profile:

The tooth profile of an HTD pulley is trapezoidal in shape. It consists of a series of trapezoidal teeth evenly spaced around the circumference of the pulley. The tooth profile is specifically designed to match the shape of HTD belts, which also have trapezoidal teeth. The trapezoidal tooth profile ensures a larger contact area between the pulley and the belt, enabling efficient power transmission and improved torque capacity.

2. Tooth Pitch:

The tooth pitch of an HTD pulley refers to the distance between the center of one tooth to the center of the adjacent tooth. HTD pulleys are available in different tooth pitches, such as 3 mm, 5 mm, 8 mm, and 14 mm, among others. The tooth pitch must match the tooth pitch of the corresponding HTD belt to ensure proper engagement and power transmission. It is essential to select a pulley with the correct tooth pitch for a given application.

3. Tooth Angle:

The trapezoidal teeth of an HTD pulley have a specific tooth angle. The tooth angle refers to the angle between the tooth face and a line perpendicular to the pulley’s axis. The tooth angle for HTD pulleys is typically 20 degrees. This angle ensures a positive engagement between the pulley and the belt, minimizing the risk of slippage and providing reliable power transmission.

4. Tooth Shape:

The teeth of an HTD pulley have a slightly curved or rounded shape to facilitate smooth engagement and disengagement with the HTD belt. The curved tooth shape allows for gradual contact between the pulley and the belt, reducing stress concentration and minimizing the risk of tooth or belt damage. The curved tooth shape also helps reduce noise and vibration during operation.

5. Flanges and Belt Retention:

HTD pulleys often feature flanges on either side of the toothed section. The flanges help keep the HTD belt properly aligned and prevent it from slipping off the pulley during operation. The flanges provide lateral guidance and improve the overall stability of the belt. In some cases, the flanges may have recessed areas or grooves to accommodate belt guides or tensioning mechanisms.

6. Material and Construction:

HTD pulleys can be made from various materials, including aluminum, steel, or plastic. The material choice depends on factors such as the application requirements, operating environment, and cost considerations. Aluminum pulleys are lightweight and commonly used in applications where weight reduction is important. Steel pulleys offer high strength and durability, suitable for heavy-duty applications. Plastic pulleys are often used in applications where corrosion resistance, low noise, and cost-effectiveness are priorities.

7. Number of Teeth:

HTD pulleys are available in different configurations with varying numbers of teeth. The number of teeth affects the speed ratio and the torque capacity of the pulley system. Pulleys with more teeth provide higher torque capacity but may result in a larger pulley size. The selection of the appropriate number of teeth depends on the specific application requirements, including the desired speed, torque, and space limitations.

In summary, an HTD pulley features a trapezoidal tooth profile designed to match HTD belts. Its design includes specific tooth pitch, tooth angle, tooth shape, flanges for belt retention, and a choice of materials. The design features and tooth profile of an HTD pulley ensure efficient power transmission, accurate timing, reduced slippage, and reliable operation in various applications requiring high torque capacity and precise synchronization.

China Custom Power Transmission Component Timing Belt Pulley   with Great quality China Custom Power Transmission Component Timing Belt Pulley   with Great quality
editor by CX